WI-LIGHT 2

New Mobile Remote light App Control for smartphone and tablet

NEW App FOR 2022

WEB Remote with Wi-Light 2 and CQSA-E

The latest Wi-Light App allows the user to remotely command the CQSA-E interface and Chromateq software over the Internet (as well as over LAN and WLAN)
Creating a user account enables you to associate your CQSA-E with your registered account
The power of remote project management in the palm of your hand

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Scene or Trigger buttons: Press to turn On/Off.

Hold to change settings, name and appearance. (Click Here)

Trigger Page to Start/Stop Scenes

Exit the application

Zones: Press to select a Zone. Hold to change settings, name and appearance. (Click Here)

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Zones: Press to select a Zone. Hold to change settings, name and appearance. (Click Here)

Slide ON/OFF to override the Live colour and resume the current Scene in the selected Zone

Wheel mode: RGBW colour picker in Live

Colour Preview

Colour Picker to apply a RGB/W Colour (effective on the fixture from the scene)

Cursor to adjust the Colour Intensity

Colour and Live Control Page

(colour picker, RGB/RGBW sliders, live scene controls)

Exit the application

Zones: Press to select a Zone. Hold to change settings, name and appearance. (Click Here)

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Slide ON/OFF to override the Live colour and resume the current Scene in the selected Zone

Cursor mode: RGB/W colour selection with sliders

Colour Preview

Colour and Live Control Page

(color picker, RGB / RGB/W sliders, live scene controls)

Exit the application

Zones: Press to select a Zone. Hold to change settings, name and appearance. (Click Here)

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Slide ON/OFF to override the Live colour and resume the current Scene in the selected Zone

Live Control mode: send scene commands

Colour Preview

Highlight: All fixtures output white at maximum intensity

Black-out: All fixtures light output off

Next: Jump to the next Scene in the list of the current Zone

Pause: Current Scene Pause in the selected Zone

Dimmer: Adjust light output intensity of the current Scene in the selected Zone

Speed: Change the Speed of the current Scene in the selected Zone

Colour and Live Control Page

(color picker, RGB/RGBW sliders, live scene controls)

Live Control mode: send scene commands

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Change button colour

Enable / Disable settings

Pick button and text colour

Colour Preview

Cursor to adjust the Colour Intensity

Exit the application

Change button colour

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Enable / Disable settings

Colour Preview

Adjust button and text colour

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Show / Hide customizations

Change button icon, name and image

Change the name

Import image from a directory

List of available icons, select an icon to modify

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Add a countdown to the button

Countdown settings

Enable / Disable the countdown

Enable / Disable the numeric countdown reminder button display (60 seconds)

Stop the scene at the end of the countdown

Enable / Disable the reminder gauge display on the buttons

Add a button Countdown

Countdown settings

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Show / Hide customizations

Customization page

Show / Hide a background image

Icons

Change the Zone name

Import image from a directory

List of available icons, select an icon to modify

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Show / Hide customizations

Check / Uncheck to choose displayed scenes

Displayed scenes

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Slide ON/OFF to cancel the changes on all channels

Individual Channel mode

Select a DMX universe (from 1 to 4) to display channels

Click on a channel and set the DMX level manually

Scroll through 32 cells at a time to browse the 512 channels of the current universe

Exit the application

Cursor and Channel control page to control individual channels or create customizable control cursors

Set the DMX level manually, Apply or Cancel the DMX value on the channel

Apply the modifications and DMX value

Cancel the modifications and DMX value

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Custom cursor mode

Apply or Cancel the current DMX value on the selected Cursor

Select a page of Cursors
(5 max per page)

Add a new Cursor in the current page

Delete the selected cursor

Hold the icon for modification

Hold the cursor icon to display the cursor configuration mode and change its setting (Click Here)

Set the DMX level manually.
Blue colour indicates the current cursor. DMX value is displayed on top of the cursor. Increase or decrease the DMX Value with the arrows

Channel Page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Confirm

Change the Cursor icon and name

Change the name of the Cursor

List of available icons, select an icon to modify

Channel Page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Confirm

Custom cursor mode

Setup the DMX range values of the cursor

Select a DMX universe

Select the channels of the cursor

Scroll through 32 cells at a time to browse the 512 channels of the current universe

Channel Page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Apply the current date and time of your mobile/computer to the interface

Confirm and apply the current settings to the connected interface

Refresh the current clock and date of the connected interface

Clock and Calendar setting of the connected interface

Time preview

Setup Hours / Minutes / Seconds / Month / Year of the connected interface

Choose the day of the month

Interface Settings page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Confirm and apply the current settings to the connected interface

Refresh the current clock and date of the connected interface

Advanced Configuration of the connected interface to setup the IP setting and default mode

Change the Interface short name

Change the NODE name

Setup the default static IP address of the interface

Setup the IP Subnet mask of the interface

Setup the default Subnet of the NODE

Setup the default DMX Universe of the NODE

DMX Mode (configure the interface to play DMX)

Artnet Mode (configure the interface to play Art-Net from the SD Card show)

sACN Mode (configure the interface to play Art-Net from the SD Card show)

Node Mode (configure the interface to convert At-Net into DMX on 2 ports)

Reboot the connected interface to apply the selected mode

Interface Settings page

Exit the application

Refresh the current clock and date of the connected interface

Ethernet interface's Master option

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

Confirm and apply the current settings to the connected interface

Change the interface's long Name

Enable / Disable the Ethernet interface's Master option (when not using Master/Slave, disabling the Master setting avoids Ethernet signal interference)

Enable / Disable the Ethernet interface's Master option (when not using Master/Slave, disabling the Master setting avoids Ethernet signal interference)

Schematic of the Master/Slave connection

Interface Settings page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

About the Wi Light 2 application (current installed version, developer credits)

Refresh the list of compatible devices available on the network

List of visible devices and software on the network

List of compatible and detected devices and software

Add the selected interface to your user accoun (requires a validated user account and validated serial number)

Remove the selected interface from your user account (requires a validated user account and validated serial number)

Communications and General Settings page

Exit the application

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

About the Wi Light 2 application (current installed version, developer credits)

Display options

Refresh the list of compatible devices available on the network

Activate and enter a password to secure access to the communication and general settings page

Display / Hide the Trigger page

Display / Hide the Cursor and Channel Control page

Display buttons in grid or list format

Display / Hide buttons and Zone display customisations

Display / Hide the Colour and Live Control page

Display / Hide the software Timeline and Interface Settings page

Group the 5 zones in a single page (all scenes will follow each other)

Communications and General Settings page

Exit the application

Enter your user account login name

Enter your user account password

Enter your user account emaill

WIFI connection status

Green: Connected to a device (interface or software)
Red: No device found or connection lost

About the Wi Light 2 application (current installed version, developer credits)

Network settings mode

Display available network cards on the mobile

Refresh the network card list

Refresh the list of compatible devices available on the network

Delete the user (requires valid email, password and account name, a confirmation email is sent)

Enable / Disable local network connection

Show or change local Network card IP address

Enable / Disable Internet network connection

Confirm a new IP address (Manual setting)

Add a new user (if email, password and account name are valid and are not yet registered)

Password recovery (enter your email to recover your forgotten password)

Communications and General Settings page

Exit the application

The second generation of the Wi-Light App has been completely redesigned to provide tight integration with the latest versions of Chromateq software and new Ethernet-enabled stand alone devices such as the CQSA-E.

Wi Light App comes with a new look, a slick dark skin and an updated graphical user interface.

A powerful easy-to-use mobile app that enables remote lighting control over a WiFi connection, Wi Light App plays scenes saved on Chromateq stand alone hardware devices and plays shows and audio timelines from the Chromateq software. WiLight App is faster, manages 5 zones with customizable buttons, and offers handy utilities such as remote adjustment of the time and date of the CQSA-E.

The new Wi Light App is always free and always available on Google and in the Apple store.

Main Light App Features

Take live control of Chromateq software from a phone or tablet with a WiFi connection and Internet access

Remotely control the CQSA-E 1024 interface in Standalone Mode without a computer via a local network access point LAN or WLAN

Easily trigger (start/stop) scenes, select zones, choose colors from an RGB/W palette, adjust dimmer and speed, blackout, highlight, pause, and directly control individual DMX channels

Create customized cursors and count down, personalize your button graphics and secure your app with a password

100% free and available on Google Play for Android and App Store for iOS

Light App Functionalities

Tablet, mobile phone, Android and iOS compatible

Automatic WiFi network management

Automatic Chromateq software and CQSA-E device discovery

Works with both DHCP and static IP addressing

Quick access and fast network connection

Play 1 scene from your scene list for each zone

Take instant control of RGB/W color selection

Individual or group DMX channel control and adjustment

Hardware selection by IP address and hardware Serial No.

Instant slider/button control of global functions: Master Dimming, Black Out, Highlight, Pause

Speed adjustment during scene playback

Latest Updates

Sleek new “dark” design
Immediate fixture control at start-up
5 zones of management across 5 pages of scene memory
Play up to 5 scenes simultaneously (1 scene per Zone).
Merge scenes from the 5 zones in a single page
Modify button icons, colors and text
Add customized cursors with a group of channels
Button display in Grid or List view
Manage up to 4 DMX universes
General individual channel levels Cut-off
Connect multiple CQSA-E devices (32 max.) with the same app
Control Pro DMX and Pixxem Audio Timelines
Set the time and date of the CQSA-E clock
Manual or Automatic IP address and network settings option

Developer Notes

Android compatibility: 5.0 and higher

Supports DHCP and static IP modes

Wi Light App requires an access point (WiFi router) to connect with a computer running Chromateq software or a CQSA-E interface

The app uses an open JSON communication protocol to send and receive command data from Chromateq software and CQSA-E

Chromateq JSON protocol is open to developers and can be used by any app or software when implemented in the code

Support and Download

Documentation

Software Brochure

Software description, features and specifications

Device Comparison Chart

Table comparing Chromateq interface features by model

Chromateq Packages

Introduction to Chromateq interfaces
(EN, FR, ES, CN)

Chromateq Flyers

Quick products and company presentation
(EN, FR, ES, CN)

Software

Download

Windows, Mac OS, Linux, and Raspberry versions of LED Player, Pro DMX, PIXXEM, and Studio DMX.

USB drivers are included in the installation package.

UDP Protocol

Free open source Ethernet development kit

For easily communicating with Chromateq software and hardware via Ethernet from a 3rd party device.

SDK

Software Development Kit - Libraries and DLL files to develop your own DMX applications compatible with Chromateq hardware via USB communication.

Device Tool

Utility program that easily updates and configures Chromateq interfaces: Network/IP settings, firmware updates, product upgrades, clock/calendar settings, and Art-Net configuration.

Additional Support

Product pictures

High-resolution CLUB-E Chromateq product images for commercial use, promotion and marketing

CE Certificates

Certificates for customs clearances and regulations (RoHS, CE, LVD)
English files

Fixture Profiles

Current fixture personality library (collection of fixture profiles included with the latest software release)

Win7 USB Drivers

Old USB drivers for Windows 7
Requires a manual installation

Worldwide lighting control manufacturer, video and lighting software developer for lighting control solutions. We are a global supplier of professional lighting controllers for architectural, entertainment and stage lighting.

CHROMATEQ SARL

191 Allée de Lauzard - Bat B, Rdc 1

34980 St Gély du Fesc, FRANCE

Tel (fr): +33 (0) 952210755

Siret : 52145803400027

VAT # : FR18521458034

HOME
About Us
Portfolio
Software
Download
Manuals
Datasheets
Tutorials – FAQ
Contact Us

PRODUCTS
CQSA – E 1024 / PRO
CQSA 512 / 1024
SLIM 512 / 1024
DIN 1024
Pro NET & PIXXEM
CLUB 1024
LP 512
LP 128

Copyright © 2021 CHROMATEQ – All Rights Reserved

Manage Cookies| Terms of Use | Privacy Statement

Subscribe to our Newsletter

WI-LIGHT 2

NEW App FOR 2022

The new Wi Light App is always free and always available on Google and in the Apple store.

Main Light App Features

Light App Functionalities

Latest Updates

Developer Notes

Software Brochure

Device Comparison Chart

Chromateq Packages

Chromateq Flyers

Download

UDP Protocol

SDK

Device Tool

Product pictures

CE Certificates

Fixture Profiles

Win7 USB Drivers