Chromateq

WI-LIGHT 2

New Mobile Remote Control App

NEW FOR 2022

WEB Remote with Wi-Light 2 and CQSA-E

  • The latest Wi-Light 2 App allows the user to remotely command the CQSA-E interface and Chromateq software over the Internet (as well as over LAN and WLAN)
  • Creating a user account enables you to associate your CQSA-E with your registered account
  • The power of remote project management in the palm of your hand

Displays the WiFi state
- Green: connected
- Red: lost connection

Scene button: Press and hold to change its settings (Click Here)

Slide ON/OFF to resume the current scene values and cancel the current colour

You can selection one of the tree option to adjust the colour ( RGB palette )

Colour Preview

You can use the RGB palette to apply a colour

You can use this slider to adjust the colour intensity

Coulour and Live controle page

Exit APP

Scene button: Press and hold to change its settings (Click Here)

Displays the WiFi state
- Green: connected
- Red: lost connection

Slide ON/OFF to resume the current scene values and cancel the current colour

You can selection one of the tree option to adjust the colour ( RGB palette )

Colour Preview

You can use the RGB palette to apply a colour

Coulour and Live controle page

Exit APP

Scene button: Press and hold to change its settings (Click Here)

Displays the WiFi state
- Green: connected
- Red: lost connection

Slide ON/OFF to resume the current scene values and cancel the Live colour

You can selection one of the tree option to adjust the colour ( RGB palette )

Live controle page

Colour Preview

Highlight: all fixtures output white at maximum intensity

Black-out: all fixtures light output off

Pause: current scene pauses

Dimmer: adjust light output intensity of the current scene in the selected zone

Speed: change the speed of the current scene

You can use the RGB palette to apply a colour

Coulour and Live controle page

Exit APP

Write the current date and time of your mobile/computer to the interface

Displays the WiFi state
- Green: connected
- Red: lost connection

Scene icons: Press and hold to change its settings (Click Here)

Triggers, to start/stop buttons

Exit APP

Program or Trigger buttons: Press and hold to change its settings (Click Here)

Displays the WiFi state
- Green: connected
- Red: lost connection

Enable/Disable to apply the settings

Colour and Live controle page

You can use the RGB palette to apply a colour

Colour Preview

You can use this slider to adjust the colour intensity

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Enable/Disable to apply the settings

Coulour and Live controle page

Colour Preview

Use the sliders to apply a colour

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Show / Hide customizations

Customization page

Change name

Import image

Menu of all available icons

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Enable/Disable to apply the settings

Timer

Enable/Disable timer animation

Countdown animation for the timer

Stop at the end of the animation

Circular animation for the timer

Setup the duration of the timer

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Show / Hide customizations

Customization page

Show/Hide a background image

Icons

Change the Zone name

Import image

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Show / Hide customizations

Check / Uncheck to choose displayed scenes

Displayed scenes

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Slide ON/OFF to resume the current scene and cancel the changes on all channels

Channels Page

Select a DMX universe (from 1 to 4)

Click on the channel and set the DMX level manually

Scroll through 32 cells at a time to browse the 512 channels of the current universe

Channels page

Exit APP

Set the DMX level manually

Click to apply the modification

Click to cancel the modification

Displays the WiFi state
- Green: connected
- Red: lost connection

Custom cursor

Slide ON/OFF to resume the current scene and cancel the changes on all channels

Select a page

Add a cursor

Delete the selected cursor

Hold to display the cursor configuration mode (Click Here)

Click on the cursor and set the DMX level manually

On/off

Channels page

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Confirm

Customise the cursor

Name the cursor

Channels page

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Confirm

Cursor configuration mode

Choose the DMX range of the cursor

Select a DMX universe

Select the channels you wish to control

Channels page

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Confirm and apply settings

Refresh the interface current clock

Clock settings

Time preview

Hours / Minutes / Seconds / Month / Year

Days

Interface Settings

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

Confirm and apply settings

Refresh the interface current clock

Interface configuration

Interface Short Name

Node Name

IP Address

Subnet Mask

Subnet

DMX Universe

DMX Mode

Artnet Mode

sACN Mode

Node Mode

Reboot interface to apply new Mode

Interface settings

Exit APP

Refresh the interface current clock

Displays the WiFi state
- Green: connected
- Red: lost connection

Confirm and apply settings

Interface long name

Enable/Disable the interface’s Master/Slave option

Interface settings

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

About the Wi-Light 2 application

Refresh the compatible devices available on the network

General Settiings

Displays compatible devices or software available on the network

Add interface

Remove interface

Settings Page

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

About the Wi-Light 2 application

Network settings

Displays available network cards

Refresh network cards

Enables/Disables search on local network

Manually enter the IP

Enter username

Create the user (a confirmation email is sent)

Enter password

Delete the user (a confirmation email is sent)

Settings Page

Enter a valid email

Exit APP

Displays the WiFi state
- Green: connected
- Red: lost connection

About the Wi-Light 2 application

Display options

Refresh the compatible devices available on the network

Activate and enter a password to secure access to the Settings

Show / Hide the Triggers page

Show / Hide the Channels page

Display the buttons in a grid or a list

Show / Hide the button and Zone customization

Show / Hide the Colour Control page

Show / Hide the Timeline or Interface settings page

Groups all zones in 1 page

Settings Page

Exit APP

The second generation of the Wi-Light App has been completely redesigned to provide tight integration with the latest versions of Chromateq software and new Ethernet-enabled stand alone devices such as the CQSA-E.

Wi-Light 2 comes with a new look, a slick dark skin and an updated graphical user interface.

A powerful easy-to-use mobile app that enables remote lighting control over a WiFi connection, Wi-Light 2 plays scenes saved on Chromateq stand alone hardware devices and plays shows and audio timelines from the Chromateq software. Wi-Light 2 is faster, manages 5 zones with customizable buttons, and offers handy utilities such as remote adjustment of the time and date of the CQSA-E.

Wi-Light 2 is always free and always available on Google and in the Apple store.

Main App Features

  • Take live control of Chromateq software from a phone or tablet with a WiFi connection
  • Remotely control the CQSA-E 1024 interface in Standalone Mode without a computer via a local network access point (LAN or WLAN)
  • Easily trigger (start/stop) scenes, select zones, choose colors from an RGBW palette, adjust dimmer and speed, blackout, highlight, pause, and directly control individual DMX channels
  • 100% free and available on Google Play for Android and App Store for iOS

Functionality

  • Tablet, mobile phone, Android and iOS compatible
  • Automatic WiFi network management
  • Automatic Chromateq software and CQSA-E device discovery
  • Works with both DHCP and static IP addressing
  • Quick access and fast network connection
  • Play 1 scene from your scene list for each zone
  • Take instant control of RGBW color selection
  • Individual DMX channel control and adjustment
  • Hardware selection by IP address and hardware Serial No.
  • Instant slider/button control of global functions: Master Dimming, Black Out, Highlight, Pause
  • Speed adjustment during scene playback

Latest Updates

  • Sleek new “dark” design
  • Immediate fixture control at start-up
  • 5  zones of management across 5 pages of scene memory
  • Play up to 5 scenes simultaneously (1 scene per Zone).
  • Merge scenes from the zones in a single page
  • Modify button icons, colors and text
  • Button display in Grid or List view
  • Manage up to 4 DMX universes
  • General individual channel levels Cut-off
  • Connect multiple CQSA-E devices (32 max.) with the same app
  • Control Pro DMX and Pixxem Audio Timelines
  • Set the time and date of the CQSA-E clock
  • Manual or Automatic IP address and network settings option

Developer Notes

  • Android compatibility: 5.0 and higher
  • Supports DHCP and static IP modes
  • Wi-Light 2 requires an access point (WiFi router) to connect with a computer running Chromateq software or a CQSA-E interface
  • The app uses an open JSON communication protocol to send and receive command data from Chromateq software and CQSA-E
  • Chromateq’s JSON protocol is open to developers and can be used by any app or software when implemented in the code

Support and Download

Software Brochure

Software description, features and specifications

Device Comparison Chart

Table comparing Chromateq interface features by model

Download

Software download page

USB drivers are included in the installation package.

Product pictures

High-resolution Chromateq product images for commercial use, promotion and marketing

Fixture Profiles

Current fixture personality library (collection of fixture profiles included with the latest software release)

Win7 USB Drivers

Old USB drivers for Windows 7
Requires a manual installation